Once calibrated, you can measure the proximity of the beacon with the app as well. There's also a way to calibrate the measured power of the beacon by holding it at a set distance away, then letting it go through a calibration process. To update any of those settings, you just enter a valid PIN (which you can also apply), then change the settings and hit Apply. Tapping on a discovered beacon shows its name and advertised UUID identifier, major identifier, minor identifier, power value, rate setting, and transmit power setting. You can scan for configurable RadBeacons with a single swipe gesture, and each discovered beacon displays its name, model, and ID. The free RadBeacon app (universal, optimized for iPhone 5) is used to configure RadBeacon proximity beacons. The US$29 RadBeacon USB (left in image at the top of this post) is a tiny USB dongle that can be plugged into any standard USB adapter for power, while the $39 RadBeacon Tag (the white tag in the middle of the top image) is a battery-powered tag that is perfect for those situations where power may be an issue.īoth the devices work with apps from Radius Networks as well as any other apps that are aware of iBeacons. Well, Radius Networks is now rolling out the hardware in the form of what it calls RadBeacons, and I recently had a chance to try out two models and configure them with their own unique names. The idea of low-power Bluetooth beacons that can coax apps into providing information about something that's near them is very cool, and a while back I wrote about some apps available from Radius Networks that provided a way to start playing with the technology without investing in any physical iBeacons. If the Beacon has been programmed, you'll see it successfully found.Although I'm not a developer by any stretch of the imagination, I find the concept of iBeacons to be fascinating. On this screen is a place to tap to "Search for Beacon". You'll find this by tapping the Settings tab, then Automatic Status Updates, then Beacons, then the Beacon you just programmed. Open the Simple In/Out app on your phone and navigate to the Beacon page for the Beacon you just programmed. Step 5: Confirm Beacon is broadcasting correctly You can set the pin to anything you wish, just as long as you can remember it for future reprogramming. Any Beacon programmed by Simple In/Out will have a pin of either 0000 or 00000000. The apply button will be under the Actions menu or be a button on the Mac app. It should match the one you copied from step 2. Paste the UUID from Simple In/Out over the existing UUID. Below is the Mac app and what it will look like when it finds the Beacon you just plugged in. On a phone version of the RadBeacon app, you'll pull to refresh. On Mac, you'll click the Start Scanning button. Once the app is running, plug in your hardware Beacon so it has power. Open the RadBeacon app (either iOS, Android, or Mac). Step 3: Find the hardware inside the RadBeacon app The UUID listed will be the one we'll use to program the hardware. The following screen will be present, where you'll need to give your new Beacon a name and click Create Beacon. If you do not yet have a Beacon, you'll click the Add Beacon button to create one. Then, copy the UUID, which is what we'll use to program. If you already have a Beacon that you wish to use to program your hardware, click the name of the Beacon on this screen to view the details. Here is a list of all the Beacons that Simple In/Out knows about for your organization. Click Settings in the upper-right, followed by Beacons on the left. Head to and log in with your email/password. If you already have the UUID you want program into your Beacon, you can skip this step. All RadBeacon USB hardware have a 30 minute lockout that prevents tampering and will make them unavailable until powered off and back on. This is to avoid reprogramming the wrong Beacon. Unplug any Beacons that may be in range of your device used to reprogram. Places to download: Windows, Mac, iOS, Android. To reprogram a hardware Beacon you will need the free RadBeacon app from Radius Networks. You will also need to be an administrator of Simple In/Out in order to view your Beacons and unique identifiers (UUID), which are required for programming. If you need to purchase Beacon hardware, check out our Beacon Hardware Purchasing Guide. While these steps are specific for this vendor, there are likely similar steps for other hardware Beacon vendors. This article will assist you with programming a RadBeacon USB for Simple In/Out.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |